{"product_id":"koch-finisher-shinespeedpolish-250ml","title":"Koch Chemie The Finisher ShineSpeedPolish: Finishing Polish","description":"\u003ch2\u003eKoch Chemie ShineSpeedPolish: The Finishing Polish That Defines The Result\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eKoch Chemie ShineSpeedPolish\u003c\/strong\u003e is the finishing polish from the Koch Chemie The Finisher line, engineered to refine the surface after a heavy-cut step and leave paint with maximum gloss, no holograms and no haze. Developed in the Koch Chemie laboratories in Unna, Germany, ShineSpeedPolish uses a finer abrasive grade that removes the micro-marring left by cutting compounds while bringing out the depth and reflectivity that defines a corrected paint surface.\u003c\/p\u003e\n\u003cp\u003eWhere a heavy-cut compound like PowerSpeedPolish does the work of removing defects, ShineSpeedPolish does the work of making the paint look right. The German formulation finishes down to a near-mirror surface on most paints, ready for ceramic coating, sealant or wax application. Use it as the second stage of a two-step correction, or as a one-step polish on already-corrected paint to refresh the finish before applying HydroBoost or another last-step product.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Detailers Trust ShineSpeedPolish\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinishing-grade abrasive:\u003c\/strong\u003e refines the surface to a near-mirror finish, removing micro-marring from cutting stages.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHologram-free finish:\u003c\/strong\u003e formulated to leave a clean surface without the rotary swirl pattern that affects amateur correction work.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum gloss:\u003c\/strong\u003e brings out paint depth and reflectivity, especially noticeable on dark and metallic colours.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePad-friendly:\u003c\/strong\u003e works with finishing foam pads on dual-action and rotary polishers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow dust:\u003c\/strong\u003e the lubricated formula keeps work areas cleaner than dry-cutting compounds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in Germany:\u003c\/strong\u003e formulated and bottled in Koch Chemie's own laboratories in Unna.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Use Koch Chemie ShineSpeedPolish\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAs the second step after PowerSpeedPolish:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eWipe down the panel with a clean microfiber towel to remove residue from the cutting step.\u003c\/li\u003e\n  \u003cli\u003eApply 3 to 4 pea-sized dots of ShineSpeedPolish onto a clean finishing foam pad.\u003c\/li\u003e\n  \u003cli\u003eSpread the product across a 60 by 60 cm section at low speed (DA setting 1 to 2 or rotary 600 RPM).\u003c\/li\u003e\n  \u003cli\u003ePolish at finishing speed (DA setting 3 to 4 or rotary 1000 to 1200 RPM) with overlapping passes, light pressure.\u003c\/li\u003e\n  \u003cli\u003eContinue until the product flashes from creamy to clear and the surface shows full gloss. Typically 3 to 5 passes per section.\u003c\/li\u003e\n  \u003cli\u003eWipe the section with a clean microfiber towel to inspect the gloss and check for any remaining defects.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eAs a one-step polish on light defects:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eFor light swirl marks and water etching, ShineSpeedPolish on a finishing pad can correct and finish in one stage.\u003c\/li\u003e\n  \u003cli\u003eFollow the same workflow but expect to need 5 to 7 passes per section to achieve correction.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePro tip:\u003c\/strong\u003e after polishing, prep the paint with an IPA wipe-down or panel-prep product before applying ceramic coating, sealant or HydroBoost. This removes polish oils that would otherwise prevent proper bonding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e ShineSpeedPolish is a finishing polish, not a cutting compound. For real defects (1500-grit scratches, deep swirls, oxidation), start with PowerSpeedPolish first. Trying to remove heavy defects with ShineSpeedPolish alone will overwork the polish and produce inferior results.\u003c\/p\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e finishing polish for paint correction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAbrasive:\u003c\/strong\u003e fine-grade abrasive, low cut, high finish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCut level:\u003c\/strong\u003e finishing (removes micro-marring, light swirls, water etching)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible pads:\u003c\/strong\u003e finishing foam, soft microfiber finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible machines:\u003c\/strong\u003e dual-action polishers (DA), forced-rotation polishers, rotary polishers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorking area:\u003c\/strong\u003e 60 by 60 cm sections recommended\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e a 250ml bottle handles roughly 8 to 12 full-vehicle finishing steps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAvailable size:\u003c\/strong\u003e 250ml\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Germany, by Koch Chemie GmbH in Unna\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand line:\u003c\/strong\u003e Koch Chemie The Finisher (premium consumer range)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between ShineSpeedPolish and PowerSpeedPolish?\u003c\/strong\u003e\u003cbr\u003e\nShineSpeedPolish is the finishing stage that refines the surface and brings out gloss. PowerSpeedPolish is the heavy-cut stage that removes defects. The two products are designed to work as a two-step correction system: PowerSpeedPolish first to remove damage, ShineSpeedPolish second to finalize the surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use ShineSpeedPolish alone without PowerSpeedPolish?\u003c\/strong\u003e\u003cbr\u003e\nFor light defects such as minor swirl marks, water spotting and light oxidation, yes. ShineSpeedPolish on a finishing pad can correct light damage and leave the surface ready for last-step protection. For heavier defects you need to start with PowerSpeedPolish first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill ShineSpeedPolish leave holograms?\u003c\/strong\u003e\u003cbr\u003e\nNo, when used correctly. ShineSpeedPolish is specifically formulated to finish down without leaving the rotary swirl pattern that affects amateur correction work. Use light pressure, appropriate speed and a clean finishing pad for best results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs ShineSpeedPolish safe on ceramic coatings?\u003c\/strong\u003e\u003cbr\u003e\nNo. Like all polishes, ShineSpeedPolish removes ceramic coatings, sealants and wax during use. After polishing you need to reapply your last-step protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat pad should I use with ShineSpeedPolish?\u003c\/strong\u003e\u003cbr\u003e\nA finishing foam pad is the standard choice. Soft microfiber finishing pads also work and can provide slightly more cut for light defects. Avoid aggressive cutting pads with ShineSpeedPolish because the combination would cause more micro-marring than the polish can remove.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere is ShineSpeedPolish made?\u003c\/strong\u003e\u003cbr\u003e\nKoch Chemie ShineSpeedPolish is formulated and bottled in Germany by Koch Chemie GmbH at their headquarters in Unna. The Rag Company Europe is an authorised dealer of the Koch Chemie The Finisher line for Europe.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"Default Title","offer_id":58095026471237,"sku":"77711","price":23.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/4642\/0046\/files\/THEFINISHERShineSpeedPolish.jpg?v=1780053175","url":"https:\/\/theragcompany.de\/products\/koch-finisher-shinespeedpolish-250ml","provider":"The Rag Company Europe","version":"1.0","type":"link"}